PLEASE CHOOSE YOUR CAR MAKE

Condensation

Tech
Moisture or Condensation forming in your Lights

The moisture forming on the lens, is condensation, it's caused among other things by the difference in inside & outside temperature .
Condensation can happen in all lights including factory fitted originals & often appears in one light more than the other.

Fitting lights is a relatively simple task, which most people are easily able to do, but care is still neccesary.
Lights should ideally be fitted in warm, dry conditions and it's very important to make very sure that any seals are properly fitted.
Please also take time to check the bulb holders & dust covers on the back of the lights are firmly in place.
You can also put a small amount of vaseline or silicone on them & where the wiring goes through them to aid the seal.

For a complete explanation on why condensation and or misting may occur in your lights, please view our fitment & troubleshooting guides.
These guides will also advise how you can ensure that the lights are set up correctly & therefore aid their design to clear the condensation as soon as possible:

You can test the lights yourself to see if the bonding between the lens & housing is incomplete.
Simply fill a sink or bath etc with enough water to submerge ONLY THE LENS of the light in to the water.
Once the lens is submerged, leave for a moment & then lift the light out of the water.
If the bonding between the lens & housing is faulty, water will have entered the light.
If no water has entered the light, then the bonding is complete.

Please note: Body Kit Limited accept no liability for direct, consequential or any other losses whatsoever arising from a test being incorrectly performed. 
Alternatively, if you prefer, the light can be returned to us so that we can test the lights for you.
Please let us know if you wish to do this.

Please select your Condensation


Welcome to www.body-kit.co.uk, the UK number one supplier for all your interior and exterior car styling needs, at unbeatable prices. We stock the best quality ABS Plastic, GRP fibreglass and PUR polyuerathane full and part Car Body Kits, front/ rear bumpers, bumper lip spoilers, front splitters, rear skirts & diffusers, side skirts, rear window covers, roof or boot lid spoilers, head light brows and lowering springs from manufacturers like Lester, Rieger, ICC, P-I (Personal Identity), RGM (Richard Grant Mouldings), Auto-plas & Momo. We also stock the very latest designs in Custom Lighting, headlight bulbs, standard & LED Bulbs, including Angel eyes, Audi style, DRL headlights and HID kits. Chrome, Paintable & LED Universal Door Mirrors and glasses - Z2 (SLR Style), M3 style, DTM style, EVO M6 style & GT-R look door mirrors, from Ultra and Auto-Art. We are appointed stockists of the Race-Sport & Momo Design- Italy ranges of sport alloy road wheels & performance tyres and quality styling products. Our ever growing universal fitment range includes interior and exterior tuning and styling products including, Performance Exhaust Boxes and trims, Air Cleaners, Race style Engine Monitoring Gauges and Mounts, Aerials, Seat Covers, Gear lever knobs and leather gaiters, leather hand brake gaiters and knobs, pedal sets, chrome styling trim, seat covers. We stock an extensive range of chrome, stainless steel and carbon fibre look styling products, and we add to our range all the time. Our latest addition is high quality 9 & 16 mm snow chains and Hi-Tech fabric 'snow socks' for safety driving in the snow and ice.

Any Brand Names, Trademarks or Logos shown on this website are for illustration only and remain the property of their respective owners.
Body Kit Limited do not claim to be associated with or approved by any car manufacturer.


Real Time Analytics